|
| |
|
|
What variables are available from the 11-member RCM output accessed through the LINK website?
The LINK website contains output from the 11-member HadRM3 regional climate model ensemble (i.e. 11 sets of results) that was undertaken for the downscaling of the UKCP09 projections. These projections are available on a daily timescale at a resolution of 25 km. For more information see summary table of data sources
In detail
Outputs from the 11-member is made available free of charge through the
LINK website. However, it will not be in a user-friendly format such as
the information available through the UKCP09 User Interface. It includes the following variables:
- pstar after timestep
- specific humidity after timestep
- snow amount after timestep kg/m2
- surface temperature after timestep
- boundary layer depth after timestep
- net down surface sw flux: sw ts only
- incoming sw rad flux (toa): all tss
- outgoing sw rad flux (toa)
- clear-sky (ii) upward sw flux (toa)
- clear-sky (ii) down surface sw flux
- clear-sky (ii) up surface sw flux
- total downward surface sw flux
- net down surface lw rad flux
- total cloud amount in lw radiation
- outgoing lw rad flux (toa)
- clear-sky (ii) upward lw flux (toa)
- downward lw rad flux: surface
- clear-sky (ii) down surface lw flux
- ht flux from surf to deep soil lev 1
- surface & b.layer heat fluxes w/m2
- x-comp of surf & bl wind stress n/m2
- y-comp of surf & bl wind stress n/m2
- surface & bl total moisture flux kg/m2/s
- wind mixing en'gy flux into sea w/m2
- 10 m wind u-comp
- 10 m wind v-comp
- surface sh flux from sea (gbm) w/m2
- surface latent heat flux w/m2
- temperature at 1.5 m
- specific humidity at 1.5 m
- relative humidity at 1.5 m
- 10 metre wind speed m/s
- canopy conductance m/s
- potential evaporation rate kg/m2/s
- panofsky peak gust (m/s)
- potential evapotranspiration factor1
- potential evapotranspiration factor2
- large scale rainfall rate kg/m2/s
- large scale snowfall rate kg/m2/s
- convective rainfall rate kg/m2/s
- convective snowfall rate kg/m2/s
- total snowfall rate: ls+conv kg/m2/s
- total precipitation rate kg/m2/s
- soil moisture content
- canopy water content
- soil moisture content in a layer
- u component of wind on pressure levels
- v component of wind on pressure levels
- t on pressure levs u grid. use macro
- omega on press levs u grid.use macro
- specif hum;p levs;u grid. use macro
- geopotential height: pressure levels
- temperature on pressure levels
- relative humidity on pressure levels
- pressure at mean sea level
Find out more
|
|
You may also be
interested in…
|
|
|
|
Last Updated Tuesday, 11 January 2011 |